RAVENOL Break-In Oil SAE 30 is mineral break-in oil for start-up filling and the breaking-in of repaired or overhauled engines.
RAVENOL Break-In Oil SAE 30 dispenses with the use of friction coefficient improving additives (friction modifier) to considerably shorten the break-in phase for rebuilt and modified engines. The piston rings are rapidly seated.
Due to its high content of 2.5% ZDDP (zinc dithiophosphate) (equivalent to approx. 2,500 ppm zinc), RAVENOL Break-In Oil SAE 30 is especially recommended for driving classic V8 engines with flat tappets.
Application Note
RAVENOL Break-In Oil SAE 30 serves as a classic break-in oil and therefore can only remain in the engine for a short time (max. 1000km). The particularly high levels of anti-wear additives offer extra protection during the critical break-in phase of rebuilt engines. Please pay attention to the specifications of your engine reconditioners during the break-in phase. High engine loads and speeds are to be avoided.
Characteristics
- Very high levels of ZDDP
- No friction modifier
- Breaks the engine in as quickly as possible
Technical Product Data
Property | Unit | Data | Audit |
---|---|---|---|
Density at 20 °C | kg/m³ | 881,0 | EN ISO 12185 |
Colour | rot | VISUELL | |
Viscosity at 100 °C | mm²/s | 11,0 | DIN 51562-1 |
Viscosity at 40 °C | mm²/s | 90,6 | DIN 51562-1 |
Viscosity Index VI | 106 | DIN ISO 2909 | |
Pourpoint | °C | -27 | DIN ISO 3016 |
Flashpoint | °C | 248 | DIN EN ISO 2592 |
Sulphated Ash | %wt. | 0,9 | DIN 51575 |
All indicated data are approximate values and are subject to the commercial fluctuations.