RAVENOL WIV II SAE 0W-30

Category: Passenger car motor oil
Item number: 1111101
Viscosity: 0W-30
Specification: ACEA A5/B5
Oil type: Full synthetic
Recommendation: VW 503 00, VW 506 00, VW 506 01
Application: Passenger car
Technology: Clean Synto®

RAVENOL WIV II SAE 0W-30 is a full synthetic low friction engine oil with CleanSynto® technology for VW and Audi petrol engines and diesel engines (from model year 2000 with interchange interval WIV) including pump-nozzle engines (Pumpe-Düse-Motoren). Minimizing friction, wear and fuel consumption, excellent cold start characteristics. Extended oil change intervals according to the manufacturer's instructions.

RAVENOL WIV II SAE 0W-30 has been specially developed for VW and Audi petrol engines and diesel engines (from model year 2000 with intermittent extension WIV) including pump-nozzle engines. It allows significantly longer maintenance intervals. Excellent cold start characteristics due to a faster oiling of the system. It ensures reduced friction losses and high oil film stability as well as excellent viscosity-temperature behavior.

Application Note

RAVENOL WIV II SAE 0W-30 can be used in all long-life vehicles (except for models that require a product to VW standard 503 01).

Attention: Extended oil change intervals must never be used in engines of non-WIV vehicles. In this case, RAVENOL WIV II SAE 0W-30 may only be used with change intervals that are described by the manufacturer.

Characteristics

  • It is recommended for VW and Audi gasoline and diesel engines (model year 2000 with WIV service interval prolongation), including pump-nozzle engines.
  • A special low-friction character and an excellent range by special additives.
  • An excellent engine protection, even after a cold start and under stricter conditions.
  • Guaranteed for maximum wear protection and engine cleanliness combined with reduced fuel consumption.
  • Provides extended oil change intervals due to its exceptional product stability.
  • Supports the protection of the environment through reduced emissions.

Technical Product Data

PropertyUnitDataAudit
Density at 20 °Ckg/m³843,0EN ISO 12185
ColourbraunVISUELL
Viscosity at 100 °Cmm²/s10,1DIN 51562-1
Viscosity at 40 °Cmm²/s55,3DIN 51562-1
Viscosity Index VI174DIN ISO 2909
HTHS Viscosity at 150 °C mPa*s2,92ASTM D5481
CCS Viscosity at -35 °CmPa*s5351ASTM D5293
Low Temp. Pumping viscosity (MRV) at -40 °CmPa*s14.130ASTM D4684
Pourpoint°C-45DIN ISO 3016
Noack Volatility% M/M10,3ASTM D5800
Flashpoint°C220DIN EN ISO 2592
tbnmg KOH/g10,2ASTM D2896
Sulphated Ash%wt.1,12DIN 51575

All indicated data are approximate values and are subject to the commercial fluctuations.