RAVENOL SMO SAE 5W-30

Category: Passenger car motor oil
Item number: 1111151
Viscosity: 5W-30
Specification: API SN (RC), ILSAC GF-5
Oil type: Synthetic
Application: Passenger car
Technology: Clean Synto®

RAVENOL SMO SAE 5W-30 Synthetic Multi Oil is synthetic low friction motor oil with CleanSynto® technology for passenger car gasoline engines with and without turbo-charging and direct injection.

RAVENOL SMO SAE 5W-30 achieves a high viscosity index through its formulation with special base oils. The excellent cold start behaviour provides an optimum lubricating safety during the cold run phase.

Because of a considerable fuel saving RAVENOL SMO SAE 5W-30 contributes to protect the environment by reducing the emissions.

RAVENOL SMO SAE 5W-30 minimizes friction, wear and fuel consumption with excellent cold start characteristics. Suitable for extended oil change intervals where recommended by manufacturer.

Application Note

RAVENOL SMO SAE 5W-30 is suitable for demanding engines as high performance low friction engine oil. The specifications API SN Resource Conserving (RC) and ILSAC GF-5 are backward compatible with the respective previous specifications.

Characteristics

  • Fuel economy in part and full power operation
  • Excellent wear protection and high viscosity index also under high-speed driving conditions, the long life of the engine
  • Excellent cold starting characteristics also at low temperatures below -30°C
  • A safe lubricant film at high operating temperatures
  • Low evaporative tendency, so lower oil consumption
  • No deposits in combustion chambers, in the piston ring zone and valves
  • Neutrality towards sealing materials
  • Extended oil change intervals to protect natural resources

Technical Product Data

PropertyUnitDataAudit
Density at 20 °Ckg/m³849,0EN ISO 12185
ColourgelbbraunVISUELL
Viscosity at 100 °Cmm²/s9,8DIN 51562-1
Viscosity at 40 °Cmm²/s56,6DIN 51562-1
Viscosity Index VI159DIN ISO 2909
HTHS Viscosity at 150 °C mPa*s3,07ASTM D5481
CCS Viscosity at -30 °CmPa*s5700ASTM D5293
Low Temp. Pumping viscosity (MRV) at -35 °CmPa*s17.200ASTM D4684
Pourpoint°C-39DIN ISO 3016
Noack Volatility% M/M9,6ASTM D5800
Flashpoint°C236DIN EN ISO 2592
tbnmg KOH/g7,4ASTM D2896
Sulphated Ash%wt.0,8DIN 51575

All indicated data are approximate values and are subject to the commercial fluctuations.