RAVENOL HST SAE 5W-40

Category: Passenger car motor oil
Item number: 1111147
Viscosity: 5W-40
Specification: ACEA A3/B4, API CF, API SN
Oil type: Synthetic
Application: Passenger car

RAVENOL HST SAE 5W-40 is an engine oil with CleanSynto® technology for passenger car gasoline and diesel engines with and without turbo-charging and direct injection, formulated with synthetic base oils.

RAVENOL HST SAE 5W-40 achieves a high viscosity index through its formulation with special base oils. The excellent cold start behaviour provides an optimum lubricating safety during the cold run phase.

Because of a considerable fuel saving RAVENOL HST SAE 5W-40 contributes to protect the environment by reducing the emissions.

RAVENOL HST SAE 5W-40 minimizes friction, wear and fuel consumption with excellent cold start characteristics.

RAVENOL HST SAE 5W-40 guarantees operational safety concerning all driving conditions as for example regarding extreme stop and go traffic as well as high speed drives on motorways.

Suitable for extended oil change intervals where recommended by manufacturer.

Application Note

RAVENOL HST SAE 5W-40 is suitable for the energy saving operation year-round of all modern cars with gasoline and diesel engines in passenger cars, vans, small transporters and similar vehicles and was specially developed for turbo chargers as well as the catalytic operation.

Characteristics

  • High abrasion resistance
  • Fuel saving because of easy running characteristics
  • Excellent detergent and dispersant characteristics
  • Prevention of black sludge creation
  • Long endurance because of high oxidation stability
  • Excellent cold start performance
  • Very good viscosity temperature behaviour
  • Low evaporation
  • Suitable for catalysts

Technical Product Data

PropertyUnitDataAudit
Density at 20 °Ckg/m³847,0EN ISO 12185
ColourbraunVISUELL
Viscosity at 100 °Cmm²/s13,3DIN 51562-1
Viscosity at 40 °Cmm²/s78,2DIN 51562-1
Viscosity Index VI173DIN ISO 2909
HTHS Viscosity at 150 °C mPa*s3,91ASTM D5481
CCS Viscosity at -30 °CmPa*s5480ASTM D5293
Low Temp. Pumping viscosity (MRV) at -35 °CmPa*s25.000ASTM D4684
Pourpoint°C-42DIN ISO 3016
Noack Volatility% M/M7,4ASTM D5800
Flashpoint°C240DIN EN ISO 2592
tbnmg KOH/g12,0ASTM D2896
Sulphated Ash%wt.1,19DIN 51575

All indicated data are approximate values and are subject to the commercial fluctuations.