RAVENOL HLS SAE 5W-30

Category: Passenger car motor oil
Item number: 1111119
Viscosity: 5W-30
Specification: ACEA C3, API CF, API SN
Oil type: Synthetic
Application: Passenger car
Technology: Clean Synto®

RAVENOL HLS SAE 5W-30 is a synthetic Mid SAPS low friction motor oil with CleanSynto® technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection.

RAVENOL HLS SAE 5W-30 achieves a high viscosity index through its formulation with special base oils. The excellent cold start behaviour provides an optimum lubricating safety during the cold run phase.

Because of a considerable fuel saving RAVENOL HLS SAE 5W-30 contributes to protect the environment by reducing the emissions.

RAVENOL HLS SAE 5W-30 minimizes friction, wear and fuel consumption with excellent cold start characteristics.

RAVENOL HLS SAE 5W-30 is Mid SAPS Oils which prevents effectively the reset of the diesel soot particulate filter.

Suitable for extended oil change intervals where recommended by manufacturer.

Application Note

RAVENOL HLS SAE 5W-30 is suitable for demanding motors as a high performance low friction motor oil. It is recommended for all modern passenger car gasoline and diesel engines, including turbo versions, for direct injection motors and it is also recommended for all operation conditions. RAVENOL HLS SAE 5W-30 is recommended for use in vehicles with diesel particulate filters.

Characteristics

  • Fuel economy in part and full power operation.
  • Excellent wear protection and high viscosity index also under high-speed driving conditions, the long life of the engine.
  • Excellent cold starting characteristics also at low temperatures below -30°C.
  • A safe lubricant film at high operating temperatures.
  • Low evaporative tendency, so lower oil consumption.
  • No deposits in combustion chambers, in the piston ring zone and valves.
  • Neutrality towards sealing materials.
  • Extended oil change intervals to protect natural resources.

Technical Product Data

PropertyUnitDataAudit
Density at 20 °Ckg/m³847,0EN ISO 12185
ColourgelbbraunVISUELL
Viscosity at 100 °Cmm²/s12,2DIN 51562-1
Viscosity at 40 °Cmm²/s72,7DIN 51562-1
Viscosity Index VI166DIN ISO 2909
HTHS Viscosity at 150 °C mPa*s3,51ASTM D5481
CCS Viscosity at -30 °CmPa*s5216ASTM D5293
Low Temp. Pumping viscosity (MRV) at -35 °CmPa*s23000ASTM D4684
Pourpoint°C-39DIN ISO 3016
Noack Volatility% M/M6,9ASTM D5800
Flashpoint°C234DIN EN ISO 2592
tbnmg KOH/g7,8ASTM D2896
Sulphated Ash%wt.0,8DIN 51575

All indicated data are approximate values and are subject to the commercial fluctuations.